Qualia Coating
It is a revolutionary service born from customer requests
～The texture of the base material itself does not change at all～
Conventionally, adhesion between lacquer and glass, ceramics, etc. is poor. Until now, methods have been used to improve adhesion by applying sandblast polishing, baking, primer treatment, etc. However,
1. The number of processes is increasing, and it takes time, and costs
2. When treated with a primer, the thickness and texture of the paint come out, and the texture of glass etc. changes.
3. For example, when fine maki-e is applied to glass, the texture of the part that is not lacquered changes when the entire surface is polished or painted. Also, when it comes to masking parts that are not lacquered, it takes quite a bit of time and effort.
There were problems such as, etc. “Qualia coating processing” (Q.C processing) solved this problem.
Characteristics
It is a service that dramatically improves adhesion with lacquer by applying special surface treatment to glass, ceramics, stainless steel, silver, shellfish, etc.
- You can use your own natural lacquer
- No polishing required
- No primer required
- No baking required
- No troublesome masking
- The texture of the base material does not change
- After qualia coating, if lacquer is applied directly and dried, it will adhere strongly
- Use in combination with glass lacquer for added peace of mind
- It complies with the Food Sanitation Act
How to use
- You can entrust us with what you want to lacquer, and we will perform qualia coating processing (Q.C processing).
- After returning the item, do not degrease it with lacquer thinner or the like before applying lacquer. The effect may be reduced by half. Please be careful when handling so that fingerprints etc. do not stick.
- After processing, please apply lacquer within 1 week.
- Dry it in the same way as regular lacquer.
- After the lacquer has dried, it is recommended that you avoid using it for at least 3 weeks and leave it in a shimmer bath. Lacquer hardens further, and risks such as peeling after use can be reduced. Adhesion strength increases in proportion to the curing of lacquer.
Precautions for use
- There are also shapes that cannot be processed depending on the object.
- The Q.C processing amount varies depending on the size, shape, and number of pieces.
- There is no guarantee of 100% close contact.
- Please be sure to perform a close contact test.
Our Adhesion Test Results ~Water Immersion Test~
Normally, adhesion between glass and conventional lacquer is poor, and when soaked in water, it peels off as early as 1 day, but after applying qualia coating and drying for 3 weeks, it did not peel off even when soaked in water for half a year.
When ordering
Regarding qualia coating processing, after the customer mails it to us,
It will be processed at our company.
*It is necessary to send products, works, etc. to our company, but in that case, please bear the shipping costs.
[Reference price]
Orders for 6 unevenness glass cups start at 500 yen (excluding tax) per piece
*Please note that the price varies depending on the shape and quantity. Please be sure to contact us by phone.